This program calculates all of the technical dimensions required for the manufacture of all Berg Sprockets. It includes information useful for design purposes, such as pitch and outside diameter along the belt series, and other design critical dimensions, such as shoulder and blank diameters.


Gear Spec

This program will calculate all of the gear data necessary (and more) for manufacture of fine Pitch External Spur Gears, Internal Spur Gears, Helical Gears, Worm Gears, and Worms. It ranges from 12 Diametral Pitch to 120 Diametral Pitch for inch and 0.25 to 1.5 Module Metric Series. It will calculate gear specifications based on AGMA specifications (both Inch and Metric), gear data based on backlash classes ranging from A to E, gear quality from Q5 to Q14, and provides a printable output with a fax header. Metric calculations can be displayed and converted into inches if desired.


belt length calculator

Calculate the length of a belt required given the pitch diameters of the two W. M. Berg, Inc. sprockets and the Center to Center Distance. It can also calculate the center to center distance given the Berg Belt length and the pitch diameters of the Berg sprockets. Currently only for two sprockets.